Payment & Shipping Terms:
|Load Capacity:||Customized/1-300 Tons||Operation Mode:||Pandent And Remote Controller Or PLC|
|Application:||Factory, Warehouse, Port, Construction, Steel Structure||Rail Gauge:||1435mm (Customized)|
|Color:||Yellow/Customized||Working Time:||No Limited|
|Wheel Type:||Cast Steel Wheel||Safrty Device:||Buffer, Alarm Light, Emergency Stop Buttons|
|Special Function:||Anti-Explosion, Heat-Resistant, Lifting, Dumpling||Additional Unit:||Optional (Hydraulic Lifting Table/ Roller Guard Bar)|
automatic guided carts,
electric flat car
Introduction of Electric Steel Product Plant Transfer Bogie
The trailing cable power electric steel product plant transfer bogie adopts the AC 380V trailing cable to send power into the electrical control system, through which the car is allowed to start, stop, and travel forward or backward.
The trailing cable wire is placed on the ground in the middle of two rails. As the transfer bogie moves forward, the wire drags along behind it. One end of the cable wire is connected to the power source on the ground while the other end is connected via the trailing cable to the electrical control box of the electric steel product plant transfer bogie to supply power to the motor.
The operating system of the transfer bogie is 36V low voltage and it can be equipped with the hydraulic lifting system. As a common tool used for short-distance cross-floor transportation in factories, it features simple structure and low production cost. It is suitable for applications in high-temperature environment or explosive occasions as well as in other bad working conditions.
This series of electric steel product plant transfer bogie is mainly used in short-distance, small height, and slow speed transportation. Its maximum travel distance is 20 meters so as to avoid cable twisting problem. In order to reduce the abrasion of cable during the short-distance and slow speed transportation, the drag chain can be used.
Application Sites of Electric Steel Product Plant Transfer Bogie
Advantages of rail transfer vehicle
Main components of Electric Steel Product Plant Transfer Bogie
The principal structure of our electric steel product plant transfer bogie consists of cart frame, transmission gear (axle, drive motor, gear reducer), electrical appliance cabinet, cast steel wheels, safeguard system (warning light and horn, limit switch, buffer, railing guard, radar detector) etc.
Parameter Table of Electric Steel Product Plant Transfer Bogie
|Model||BTL-2t||BTL -20t||BTL -50t||BTL -100t||BTL -150t|
|Table Size (mm)||Length(L)||2000||4000||5500||6500||10000|
|Rail Inner Gauge(mm)||1200||1435||1435||2000||2000|
|Max Wheel Load(KN)||14.4||77.7||174||343.8||265.2|
|Recommended Rail Model||P15||P24||P43||QU100||QU100|
Henan Perfect Handling Equipment Co., Ltd is devoted to research and manufacture material handling equipment. We provide and design handling solutions to meet workshop transportation, material grading and transferring need. Our products have a wide application field including metallurgy industry, machinery manufacturing industry, mine industry, power industry, automobile assembly industry, food, pharmacy, shipyard, pigment, ceramics, chemical etc;
Our company located in Guandi Development Zone, Xinxiang, China and covered an area of 30,000 square meters. Rich design experience engineers and professional manufacturing personal take you high quality product and service. Our products have been exported to Countries, such as USA, Germany, Netherlands, Thailand, Saudi Arabia, South Africa etc.
Contact Person: Jack