Payment & Shipping Terms:
|Rated Load (T):||1-150t||Table Size:||Customize|
|Running Speed:||0-20||Ground Requirement:||Cement Floor|
|Control Mode:||Push Button Control, Wireless Remold||Motor Power (Kw):||1.5|
|Battery Capacity(Ah):||180-600||Charger Function:||Automatic Charging|
The trackless flatbed trailer is that the flatbed transporter without track, the main difference of trackless flat car and the rail flat car is that the trackless flat car adopts a solid rubberized wheel, which has the strong bearing capacity. According to the size of the load adopt the wheel diameter is different, in generally the steering mechanism will be configured. Trackless flatbed trailers can travel freely on the ground level, even turn in the same place. Track flat cars have low-voltage rails, trailing cable, batteries, and other power supply, but the trackless flat cars are only battery-powered, and the general configuration is a maintenance-free lead-acid battery, has long using life. Including electric flat car, there is also a non-powered trackless flat car with traction hooks at the next of the car that needs to be driven by external thrust or tension.
1. Compared with other ground-moving trucks, the flatcar has a smaller volume, but bearing capacity is heavy, a lower trolley table, it is convenient for loading and unloading goods,
2. The trackless electric flat car has no fixed route, it is no need to laying the track. The transfer car can be driven on the cement road of the workshop,
3. It uses the rubberized wheel, which can realize any rotation of 360 degrees, so it can run anywhere corner in the workshop.
4. It can be used outside the workshop and in the workshop to reduce flat car usage.
|Rated load (T)||2||10||20||30||50||63||150|
|Wheel Base (mm)||1200||2600||2800||3200||4200||4300||7000|
|Ground Clearance (mm)||50||50||50||50||50||75||75|
|Motor Power (Kw)||1||1.6||2.2||3.5||5||6.3||15|
When Full Load
|Running Distance for one Charge(Km)||6.5||7.2||4.8||4.2||4||3.6||3.2|
|Max Wheel Load (KN)||14.4||42.6||77.7||110.4||174||221.4||265.2|
Shan Xi ** Electric Cable Co., Ltd, located in Xian Yang of the province Shan Xi, orders BWP-10T trackless rubber-tired transfer carts which are produced in Henan Perfect Handling Equipment Co., Ltd. in November 2005.
Related technical parameters are as follows:
Deck size: 3000*2500*500mm；
Power supply mode: battery;
Operation mode: handling held control+remote;
Running speed: 0-21m/min;
Minimum turning radius:3100mm
This order transport products are large cable trays. The weight of a single cable tray is about 7.5ton, the diameter of the cable tray is 2-2.5 meters (trackless rubber-tired transfer carts installs V type frame for the convenience of placing cable tray).
The process of use: The trackless rubber-tired transfer carts transfer the cable tray from the assembly line to the warehouse when the cable tray and cable are finished, which pass two span workshop and the door of the factory.
Difficulties in transportation: Trackless rubber-tired transfer carts should be sensitive, the turning radius is limited in 3.3m. Our technician repeats the simulation of the run route in computer and lets the minimum turning radius is limited to 3.1 meters, it is flexible to turn. Rubber wheels are wearable and protect the ground from wearing, so they are the good production in transport equipment.
Contact Person: Stephen