Product Details:
Payment & Shipping Terms:
|
Product Name: | 30 Ton Die And Mold Rail Guided Transfer Cart With Electric Material Handling Equipment | Motor Power(Kw): | 3.5-15 |
---|---|---|---|
Material: | Carbon Steel | Running Speed(m/min): | 0-25 |
Rail Inner Gauge(mm): | 1200-2000 | Wheel Base(mm): | 1200-7000 |
Ground Clearance(mm): | 50-75 | Running Speed(min): | 0-25 |
Highlight: | electric transfer cart,load transfer trolley |
30 ton die and mold rail guided transfer cart with electric material handling equipment
The 30 ton die and mold rail guided transfer cart with electric material handling equipment is powered by the low voltage electricity from the railways. The power source AC 380v is transformed into AC 36v two-phase and are respectively connected to the two rails. Then the wheels and conducting plate lead the AC 36v electricity to the electrical appliance box which is installed on the transfer flat carts. And then the AC 36v is transformed into DC 36V through the transformer. then controls DC Metallurgy motor through DC control system to make the transfer flat carts start, stop, go forward and backward and adjust the speed and so on.
Functions of 30 ton die and mold rail guided transfer cart with electric material handling equipment
•powered by low voltage electricity from railways
•using time is not limited
•load capacity is not limited
•high safety level
•flexible, stable start ,big starting torque,small impact to the gear reducer
•high use frequency and not too short running distance
•long service life
•run on the rails "S", arc-shaped, direct running
•variable speed device(VFD)
•hydraulic lifting device can be installed
•can be used frequently
Detailed Image of 30 ton die and mold rail guided transfer cart with electric material handling equipment
Technical parameter table of 30 ton die and mold rail guided transfer cart with electric material handling equipment
Model | BJT-2t | BJT-20t | BJT-50t | BJT-100t | BJT-150t | |
Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
Table Size(mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
Width(W) | 1500 | 2200 | 2500 | 2800 | 3000 | |
Heigth(H) | 500 | 600 | 700 | 1000 | 1200 | |
Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 | |
Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 | 0-18 | |
Motor Power(kw) | 0.8 | 2.5 | 5.5 | 11 | 15 | |
Running Distance(m) | 25 | 30 | 50 | 50 | 50 | |
Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
Reference Weight(t) | 2.5 | 5.6 | 7.8 | 14.1 | 26.2 | |
Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 |
Application of 30 ton die and mold rail guided transfer cart with electric material handling equipment
The Battery driven rail guided vehicles for rail transfer is suitable for various occasions, for example,industries, (steel mill, transfer steel products such as steel structure, steel pipe, steel billets, steel ladle and coil, etc from one location to another; Paper roll plant: transfer paper coil Painting shops: transfer work piece into the painting room Sand blasting room) Other industries: shipbuilding, quarries, warehouses and multi-bay workshops, etc.
Contact Person: Mr. Mike Wang
Tel: 187 9067 5017
Fax: 86-0373-3020456